SS15WIV | Schedule 5 Pipe Short-Weld Female I-Line Ferrule
Austin Hose is your source for T304 or T316L Sanitary I-Line Fittings found primarily in Bakery, Beverage, Cosmetic, Dairy, Food Industries. Our fittings meet or exceed 3-A standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube. Sanitary Solutions I-Line fittings are bagged and marked with the size and alloy and a heat number for full trace ability for either alloy.
The 304 I-Line Wing Nut or I-Line Bolt Style of Clamp to form the union can be used for either the I-Line Fitting or Q-Line Fitting, but this is the ONLY Fitting that is interchangeable. Either type of clamp assembly with either the I-Line or Q-Line fittings permit easy assembly and safe fast cleaning of lines. All welds used in manufacturing are of Tungsten Inert Gas Method for true fusion of wall with no pitting or thinning. Weld end style of fittings are made to exact circularity tolerances and have true square butt ends for on site Tungsten Inert Gas Installation.
- Alloy: T304 or T316L
- Sizes: 1” OD – 8” OD
- Finish: Polish ID/OD 180 Grit
- I-Line & Q-Line Clamps are the same