SS16A Series Plain Bevel End Cap 304 Stainless Steel
Austin Hose is your source for T304 Bevel Seat Fittings and Gaskets found primarily in the Brewery, Beverage, Dairy, Winery and Food Industries.
Bevel Seat Fittings assemblies with Sanitary Acme threads provide safe cleaning and an easy assembly of lines and, as a recommendation, use a bevel seat gasket to eliminate a metal seat only connection. When viewing both a Bevel Seat Ferrule and John Perry Ferrule, look at the face of each ferrule and you will notice a “flat face” on the John Perry type versus the “Bevel Style” on the Bevel Seat Fitting. The hex nut can be used with either fitting, but not gaskets.
The 304 Hex Nut to form the union can be used for either the Bevel Seat Fitting or John Perry Fitting, but this is the ONLY Fitting that is interchangeable. These union nut assemblies with sanitary Acme threads permit easy assembly and safe fast cleaning of lines. All welds used in manufacturing are of Tungsten Inert Gas Method for true fusion of wall with no pitting or thinning. Weld end style of fittings are made to exact circularity tolerances and have true square butt ends for on site Tungsten Inert Gas Installation.
- Alloy: T304 or T316L
- Sizes: 1” – 4” OD
- Tube Wall Thickness: 0.065-0.120
- Finish: 180 Grit Polish
Plain Bevel End Cap