Kuriyama 1"x25' Armtex One Red Fire Hose

Armtex One

General Applications

• Designed and recommended for firefighting in municipal and industrial fire departments, petrochemical and nuclear plants, navies and other industrial services

Construction

• Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber and PVC blend, extruded through-the-weave and forming a single homogenous construction without the use of glues or adhesives.


• Lining Properties – The tensile strength of the lining and cover shall not be less than 1,750 PSI (12,000 kPa), with an ultimate elongation of liner and cover not less than 450%.


• Accelerated Aging – Lining specimens subjected to an exposure of 158ºF ± 3.6ºF, for a duration of 96 hours shall be conditioned as per ASTM D 573, Standard Test Method for Rubber – Deterioration in an Air Oven. Then, the specimens shall be tested to ASTM D4112, Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers- Tension, Method A. Upon evaluation, the tensile and elongation properties of the liner shall not be less than 75% of their initial values.


• Abrasion Resistance – In very extreme conditions where abrasion is the most serious concern ARMTEX® ONE will extend hose life. Excellent abrasion resistance when tested

Features & Advantages

• Specially designed for firefighting


• Fast deployment and retrieval.


• Resistant to petroleum, chemicals and abrasion.


• Sizes 1 ½” and 2 ½” are Factory Mutual Approval Standard (FM) 2111 approved.


• Service Temperature Range is -4°F (-20°C) to +176°F (+80°C)


• Withstands a surface temperature of +1,112ºF (+600ºC) for a minimum of two minutes without rupture or damage to the synthetic reinforcement when subjected to static pressure of 100 psi (700 kPa).


• Meets or exceeds National Fire Protection Association (NFPA) 1961 Standard on Fire Hose (current edition).


• ISO 9001 – ARMTEX One fire hose products are manufactured in a registered facility in Barcelona, Spain.


• 10-year warranty.

Packaging

• Standard 25’, 50’ and 100’. Special lengths such as 200’, 330’ and 660’ available on request.


• Sizes – 1” (Red or Yellow), 1 ½”, 2 ½” (Red only).