Browse Categories

Male NPT x Push-on Hose Barb

Item #: 5LOC-4RMP

Product Info

Specifications

  • Number of Barbs: 2
  • Barb Length: .77”

Construction

  • dryseal

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1” cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.


Item Specifications

  • NPTF
  • 1/4"-18
  • 5/16"
  • 9/16"
  • 1.61"
  • 350 PSI
  • -40°F to 150°F
  • 0.045
  • Brass
  • Yellow Plastic Cap
  • 0.05 lbs per
$2.78
In Stock
UOM : EA
QTY:

Have Questions?

Ask our experts: